Raychem QuickStat Manual de Instalação descarregar pdf (Página 5)

THERMAL BUILDING SOLUTIONS

EN-RaychemQuickStatTCthermostat-IM-H5851710/14

5 / 6

Vacation Mode

In this mode, the QuickStat-TC is set to the Vacation setpoint

temperature and will override all programming until Vacation

mode is disabled. To place the QuickStat-TC in this mode:

1. Press the

button, and the icon appears on the display.

2. To disable Vacation mode, press the Mode/Ret button to

change the mode to Automatic

or Manual .

To reset the QuickStat-TC to factory default settings:

3. Turn the thermostat to Off.

4. Press the up button

and switch the thermostat On.

5. After the thermostat setup is completed, release the up

button

Error Message

The measured temperature is below the thermostat’s

display range. Heating is activated.

The measured temperature is above the thermostat’s

display range. Heating is deactivated.

Verify the floor sensor connection to the thermostat.

1 2 3 4 5 6 7 8 9 10 11 12

Sem comentários

Raychem QuickStat Manual de Instalação Página 5