Raychem QuickStat Manual de Instalação descarregar pdf (Página 4)

THERMAL BUILDING SOLUTIONS

EN-RaychemQuickStatTCthermostat-IM-H5851710/14

4 / 6

Programming

The QuickStat-TC comes with a pre-programmed default

schedule. The schedule consists of 4 periods per day which

represents a typical week day.

Period Description Associated temperature setting

Wake-up

Away from home

Return home

Sleep

Default Programming

The following shows the pre-programmed default schedule in the

QuickStat-TC.

Period Setting

MO TU WE TH FR SA SU

6:00A 6:00A 6:00A 6:00A 6:00A 6:00A 6:00A

8:30A 8:30A 8:30A 8:30A 8:30A --:-- --:--

5:00P 5:00P 5:00P 5:00P 5:00P --:-- --:--

11:00P 11:00P 11:00P 11:00P 11:00P 11:00P 11:00P

The Comfort ( ) temperature is used in periods 1 and 3 and

the Economy (

) temperature is used in periods 2 and 4. For

example, when the period changes from 1 to 2, the setpoint

automatically changes from Comfort (

) temperature to

Economy (

) temperature.

Preset Temperatures

The QuickStat-TC comes with 3 preset temperatures shown

as Comfort (

) temperature, Economy ( ) temperature

and Vacation (

) temperature. The following table shows the

intended use and the default setting of each preset temperature.

Icon Intended use

A/AF

modes F mode

Comfort

(when at home)

70°F

(21°C)

82°F

(28°C)

Economy

(when asleep or away from home)

63°F

(17°C)

68°F

(20°C)

Vacation

(during prolonged absence)

50°F

(10°C)

50°F

(10°C)

Users can also change a preset temperature by:

1. Set the desired temperature using the

buttons.

2, Press and hold the corresponding preset button (

, , or

) until the corresponding icon is displayed.

Floor Temperature Limit (AF Mode Only)

The default temperature limits are 41°F to 82°F (5°C to 28°C).

Important: If your system is installed underneath laminate

or engineered wood ﬂooring, you MUST use AF mode with the

default settings. Note the factory default is AF mode.

Modifying the Schedule Programming

The user can change the programming to better meet their

lifestyle. To do so:

1. Press Pgm to access the programming mode. Period 1 will be

displayed.

2. Press Day to select the day to program for the selected peri-

od. To select the entire week, press and hold the Day button

for 3 seconds until all days are selected.

3. Press Hour and Min to set the start time of the selected

period, or press Clear if you want to skip the period (--:-- is

displayed).

Note: If you wish to use only 2 periods, set periods “1 and

4” or periods “2 and 3”. Early Start will not work if you set

periods “1 and 2” or periods “3 and 4”.

4. Press Pgm to select another period, or press Day to select

another day. They repeat step 3. Repeat steps 3 & 4 until pro-

gramming is complete.

5. Press Mode/Ret to exit the programming mode.

Operating Modes

The QuickStat-TC has three operating modes:

Automatic Mode

In this mode, the QuickStat-TC follows the programmed schedule.

To place the QuickStat-TC in this mode:

1. Press the Mode/Ret button until the

icon appears on the

display.

2. To disable Automatic mode, press the Mode/Ret button to

change the mode to Manual mode

Temporary Manual Override (in Automatic Mode )

Users can temporarily override the scheduled programming of the

QuickStat-TC. The new temperature setpoint will be used until the

beginning of the next period. To temporarily override the

QuickStat-TC:

1. Press the

, or button, while the thermostat is in

the Automatic mode, to the new desired setpoint. Once the

new setpoint is accepted, the icon will begin to flash.

2. To cancel the temporary override, press the Mode/Ret button.

Manual Mode

In this mode, the programmed schedule is not used and the

setpoint temperature must be set manually. To place the

QuickStat-TC in this mode:

1. Press the Mode/Ret button until the

icon appears on the

display.

2. Set the temperature using the

, or button.

3. To disable Manual mode, press the Mode/Ret button to

change the mode to Automatic mode

1 2 3 4 5 6 7 8 9 10 11 12

Comentários a estes Manuais

Sem comentários

Raychem QuickStat Manual de Instalação Página 4

Comentários a estes Manuais

Manuais e produtos relacionados com Termóestatos Raychem QuickStat